Distinguish between the followi py3qg (g4zpd(ulcm40ng terms:

1.Precision and accuracy.
2.Systematic error and random error.

  Which of the following is correct- k-.::n/- xaec kvl4ixthkvt?

  A thermometer was used to c 7quswwt/ixk. q9; u3record the temperature of pure boiling water at sea level three times ;t w7wxqiq kc.u3s9 /uand the values were : $85.6^{\circ}C$,$85.7^{\circ}C$,$85.5^{\circ}C$.What can be said about the accuracy and precision of these values?

  Which statement best describes the relationship between x and y on0pc3*d 6byu tkd 5(kqs0j5lzd the graph belpcjqk0udtd0kld*s 6 yb5( 5z3 ow?

  For a first order reaction, the relationship betwee64ulluh* g5p)()ni w f2 ahiu bi16wwvn rate and the concentration of a reactant, wu2)* fwph5gba6)n ui46lhli(v1wu i[A], can be shown using the following equation: rate =k[A].
The data below gives the rate information for the first order reaction that proceeds in the thermal decomposition of reactant A.



1.On the axes above, draw a graph based on the provided data.
2.The effect of time on the concentration of reactant B for a zero-order reaction was plotted on the graph below.


(i)Draw a line of best fit on the graph above.
2.2.Describe the relationship between time and concentration.
Concentration  ----待选择----decreasesincreases  linearly with time

  The relationship between pressure and temperat / a-)0 bx gknx0xydh pr;d9q5s23sosnure of a known volume and amount of gas can be described using Gay-Lussac’s law which statekho2arxnsx5qs0;sg/ nd0d)ybx 39p-s that pressure is directly proportional to temperature.
P∝T
Where P is pressure in Pa, and T is temperature in K.


1.On the axes above, sketch the graph of P∝T.

2.State two features that would need to be added to your sketched graph to turn it into a drawn graph.

3.The proportionality can be shown in an equation by incorporating a constant, k. The equation becomes P=kT, and follows the format of the equation of a straight line.

3.1.State the feature of a straight line that k represents in this context.
3.2.Deduce the y-intercept of the straight line.straight line=  (Pa)

  Solid sodium carbonate reacts wimb hq /wh6hw:8(jit l)th excess nitric acid of 0.10 mol dm$^{-3}$ as shown in the equation below:
$Na_2CO_3$(s) + 2$HNO_3$(aq)→$H_2O$(l) + $CO_2$(g) + 2$NaNO_3$(aq)
1.State a method to measure the rate of reaction other than measuring the volume of gas collected.
2.1.Sketch a graph to show the volume of gas produced over time.
2.2.Explain the shape of your graph using the collision theory.
$CO_2$ is produced in the reaction; hence, the volume of $CO_2$  ----待选择----increasesdecreases  over time.
3.On the same graph as in part(bi), sketch another line to show the volume of gas collected over time at a concentration of 0.05 mol dm$^{-3}$ of nitric acid and label it as X.
4.Suggest and describe a factor other than the concentration that can affect the rate of the above reaction.

  The enthalpy of neutralizatksx8ri 9- nxq y8;1 .aezn5syfion for the reaction between sulfuric acid and potassium hydroxide can be determin9k 8nfs s5y1x.-xrziyenq8 ;aed experimentally.
$H_2SO_4$(aq)+2KOH(aq)→$K_2SO_4$(aq)+2$H_2O$(l)
A student recorded the temperature of 20.0 cm$^3$ of 0.500 mold m$^{-3}$ sulfuric acid every minute. At four minutes,25.0cm$^3$ KOH(aq) is added to the solution, stirred immediately, and temperature recorded for another four minutes. The results are represented in the graph below.



1.Calculate the lowest concentration of aqueous KOH that must be used to ensure it is in excess.
n$_{KOH}$=  mol;C$_{KOH}$=  mold m$^{-3}$
2.Use the graph above to estimate a value for the maximum temperature change, ΔT.
ΔT=  °C
3.State one assumption you made in part (b).
4.Identify the anomalous result and suggest a possible type and source of error.
5.In another experiment with the same reactants, the student measured the initial and final temperatures and presented their results below:
Initial Temperature (°C ± 0.1°C) 24.8 25.1 24.9
Final Temperature (°C ± 0.1°C) 26.4 26.6 26.4
5.1.Calculate the average change in temperature (ΔT) giving its percentage uncertainty.
Average=  °C
5.2.Use sections 1 and 2 of the data booklet to calculate the energy released and its uncertainty. You may assume that the only source of uncertainty is from the temperature change.
Energy released (q)=  J

1.State the complete balanced equation for the reaction between s lx ,k 3q1;:mear2tfwsulphuric acid and copper (II) oxide xfksq ;1 3l2:,tramwe.
2.State the complete balanced equation for the reaction between ethanoic acid and potassium carbonate.
3.Outline two ways to monitor the rate of reaction for reaction (b) above.

  The relationship between energy, E, and wav1lla1lkf) ema 1r( ru7yf e.e+elength, λ, is shown according to the equati1u l yek e e(larr7ml1+.f1f)aon below.
E=$\frac{hc}{λ}$


Which of the below statements are correct for the graph below representing E=$\frac{hc}{λ}$
?
I. Energy and wavelength are directly proportional
II.The units for the gradient are J m$^{-1}$
III.The y-intercept has the units J

  The feasibility of a reaction proc8hfr mrc89 yiyge eitx;29p.qz;w-7ceeding spontaneously can be predicted using the following e2.8 h 9mec ;iyp8w7cgqei;9ty rzf r-xquation:
ΔG=−TΔS+ΔH.
Where ΔG is the change in Gibb’s free energy, ΔS is the change in entropy, and ΔH is the change in enthalpy.


1.When ΔG<0, a reaction can be described as spontaneous. Use the graph above to deduce the lowest temperature at which the reaction becomes spontaneous.
Read graph at ΔG=0,  K.
2.Calculate the gradient of the line and state its units.
3.Use your answer to part (b) to deduce the value and correct units for ΔS.
4.Use the graph to determine the value for ΔG when the temperature is raised to 675K.
Extrapolation of the line=  (kJ mol$^{-1}$)
5.Calculate a value for y-intercept=  and state the correct units {kJmol$^{-1}$|kJmol$^{-1}K^{-1}$}.

  The potential of a cell under non-standaa 5(xox-q) aderd conditions can be calculated using the Ner-(e5q d) xaxoanst equation:
E=E$^θ$-$\frac{RT}{nF}$lnQ
For the graph below, which components of the equation represent the gradient and the y-intercept?

  The relationship between the concentration of a reactant, A, and aokd y0ujt tqfa306y5g.i f njhb,08 ,the time, for a second-order reaction ca0, ,jha0by.g8i3 kqt5 0uoydfta 6fn jn be expressed using the equation below:
$\frac{1}{[A]}$=kt+$\frac{1}{[A]_0}$
Where [A] is the concentration of reactant A,[A] is the initial concentration of reactant $[A]_0$,t is the time in seconds,and k is a constant.


1.Calculate the gradient of the line and state the correct units.The number=  
2.Use the graph to determine $[A]_0$(also known as the initial concentration of A).
$[A]_0$=  mol dm$^{-3}$
3.Determine the time at which the concentration of A is equal to an eighth of its initial concentration.
[A]=  mol m$^{-3}$
(If you were unable to complete parts (a), and (b), you may use k=0.02, and $[A]_0$ =42).

  25.00 cm$^3$ of 0.100 mold m$^{-3}$$HNO_3$ was titrated against 0.200 mold m$^{-3}$$NaOH$.The volumes of NaOH delivered for the three trials 14.00 cm$^3$ ,14.05 cm$^3$ and 14.00 cm$^3$.
Which statement below best describes these results?